X-Plane data file definitions

Nav-aid data (nav.dat) 810 version

Scope
File structure
Changes from previous file versions
Example data and explanation

Return to the X-Plane File Definition home page

Scope

This document describes the file format and codes used in X-Plane's nav.dat file, 810 version.

• This data file format is usable with X-Plane version 8.10 onwards.

• This is the "official" definition of the X-Plane file formats.  If you spot any errors or inconsistencies, then please let me know.  Likewise if you do not think that X-Plane is interpreting these data correctly.

• The nav.dat file defines all navigation aid data in X-Plane, including global NDBs, VORs, VORTACs, VOR-DMEs, DMEs, and ILS components (localisers, glideslopes, marker beacons and any associated DMEs).

File structure

The file structure is similar to all other X-Plane data files.

• The first line of each file indicates if the file was generated on a PC (“I” for Intel or IBM) or Macintosh (“A” for Apple). X-Plane uses this code to help deal with the different ways in which PCs and Macs manipulate carriage returns in text files, and big-endian/little-endian issues.
• The second line contains a version number used by X-Plane.  This usually implies the first version of X-Plane that can utilise the file format (eg. "810 version" implies that this file format was first available for use in X-Plane version 8.10).   The version number is followed by my own long copyright message that also includes the sequential build number of the data and my own internal code for the metadata that drives the formatting). This copyright message is very long, and includes a reference to the GNU General Public Licence under which this data is published as modifiable freeware, and also an acknowledgement and a disclaimer for the US Department of Defense NIMA for the DAFIF data. The terms of this license require that this copyright message must be left intact if this file is modified and/or redistributed.
• The very last line of each file is marked by a “99”.

Here is an example of the two header lines, six nav-aids and the file termination line:

I
810 Version - DAFIF data cycle 200502, build 1922, metadata NavXP810, Copyright © 2005, Robin A. Peel (robin@xsquawkbox.net). This data is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program ("AptNavGNULicence.txt"); if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. This product was developed using DAFIF (the Defense Aeronautical Flight Information File), a product of the US National Imagery and Mapping Agency (NIMA). NIMA requires the following warranty statements: (A) Under 10 U.S.C. 456, no civil action may be brought against the United States on the basis of the content of a navigational aid prepared or disseminated by either the former Defense Mapping Agency (DMA) or the National Imagery and Mapping Agency (NIMA). (B) The DAFIF product is provided "as is," and no warranty, express or implied, including, but not limited to the implied warranties of merchantability and fitness for particular purpose or arising by statute or otherwise in law or from a course of dealing or usage in trade, is made by NIMA as to the accuracy and functioning of the product. (C): Neither NIMA nor its personnel will be liable for any claims, losses, or damages arising from or connected with the use of this product. The user agrees to hold harmless the United States National Imagery and Mapping Agency. The user's sole and exclusive remedy is to stop using the DAFIF product.

2 34.987022 -106.620384 5304   247  50      0.000 ILT  Isleta NDB
3 35.043796 -106.816312 5740 11320 130     13.000 ABQ  Albuquerque VORTAC
4 35.044026 -106.570548    0 11190  18     90.428 ISPT KABQ 08 ILS 
6 35.043212 -106.614641 5352 11190  10 300090.428 ISPT KABQ 08  GS 
7 35.046352 -106.742583    0     0   0     90.428 ---- KABQ 08  OM 
8 35.044686 -106.628247    0     0   0     90.428 ---- KABQ 08  MM 
99

The meaning of the line codes used to define each data line is:

Sequencing of data is conceptually unimportant.  But it controls the display of data on X-Plane's menu options.  By default, data is sorted by the "line code", then alphabetically by nav-aid name. 

Changes from previous file versions

• The previous file version for nav.dat was 740 version.
• A new line type has been added for DMEs that do not require a "frequency box" to be displayed on X-Plane's charts (this helps declutter the display of ILS localiser frequencies).

Example data

Here is a simplified fragment for some nav-aids in nav.dat:

2 34.987022 -106.620384 5304   247  50      0.000 ILT  Isleta NDB
3 35.043796 -106.816312 5740 11320 130     13.000 ABQ  Albuquerque VORTAC
4 35.044026 -106.570548    0 11190  18     90.428 ISPT KABQ 08 ILS-cat-I 
6 35.043212 -106.614641 5352 11190  10 300090.428 ISPT KABQ 08 GS 
7 35.046352 -106.742583    0     0   0     90.428 ---- KABQ 08 OM 
8 35.044686 -106.628247    0     0   0     90.428 ---- KABQ 08 MM 


This shows an NDB, VORTAC and an ILS (including localiser, glideslope, outer marker and inner marker).  The meaning of the data in the above example data is:

Localisers (code 4 and 5) are very similar, except that:

• They include the heading of the localiser (as described above).
• The nav-aid name is replaced by the airport code, runway number and ILS component type (eg. “KABQ 08  ILS-cat-I”).   This data is not used by X-Plane, but is used by my import programmes that allocate the ILS elements to a valid runway in the master database.  I cannot import ILS data without these codes.  The component name MUST be one of:
• ILS-cat-I
• ILS-cat-II
• ILS-cat-III
• LOC
• LDA
• SDF
• So, for a localiser-only (code 5), the name will be similar to “KSNA 19R LOC”.

Glideslopes (code 6) have very similar data to localisers, except that the glideslope angle (typically 3 degrees) is combined with the heading in a slightly complex fashion.  A glideslope of 3.00 degrees on a heading of 90.428 (true) will be listed as “300090.428”.  This is calculated by:

• Rounding the glideslope angle (3 degrees in our example data) to two decimal places (3.00).
• Multiplying the result by 100,000 (giving 300,000).
• Adding the result to the heading (300,000 + 90.428 = 300090.428).
• The ILS component name MUST be "GS" (so the entire name might be "KABQ 08 GS").

ILS marker beacons (codes, 7, 8 and 9) are formatted just like localisers, but note that:

• They have no associated frequency (use  “0”).
• They have no range (use "0") 
• The heading is important, to ensure that they are oriented and displayed correctly on X-Plane’s approach charts.
• Marker beacons do not have a Morse code identification, so “----“ is used as a default. X-Plane will automatically generate the correct series of beeps for each type of beacon, if the aeroplane's instrument panel is equipped with a marker beacon receiver.
• For a Locator Outer Marker (LOM), which is an NDB co-located with an OM, the NDB must be added to nav.dat as a separate, stand-alone NDB (at the same location!).  The name of the OM must remain in the “KABQ 08  ILS” format – but the NDB may have the appropriate name (eg. “Wobin LOM”).
• The ILS component name MUST be "OM", "MM" or "IM" (so the entire name might be "KABQ 08 OM").

DMEs (codes 12 or 13) are shown for:

• Stand-alone DMEs (common in Europe, and often associated with an NDB).
• The DME component of a VORTAC or VOR-DME (often identical position data to the co-located VOR)
• DMEs associated with an ILS - often co-located with (or very close to) the localiser aerial..
• In this case, the component name MUST be "DME-ILS", so the entire name might be "KABQ 08 DME-ILS")
• The DME bias is displayed in the heading column, as described above.

© Robin Peel, 2005.  Last updated November 26, 2007